REAR PLANETARY WHEEL ENDS REPLACEMENT - continued

TM 10-3930-673-34

9-6. REAR PLANETARY WHEEL ENDS REPLACEMENT (CONT)

(2)

Disassemble planetary spider

assembly parts (5 through 8).

WARNING

Use care when removing snap and

retaining rings. Snap and retaining

rings are under spring tension and

can act as projectiles when released

and could cause severe eye injury.

(a)

Remove three snap rings (5) from

planetary pinion shafts (6). Discard

snap rings.

(b)

Remove three washers (7) and

planetary gears (8) from planetary

TR00457

pinion shafts (6).

(3)

Remove planetary sun gear (9) and ring gear (10) from wheel hub (2).

WARNING

Use care when removing snap and retaining rings. Snap and retaining rings are under

spring tension and can act as projectiles when released and could cause severe eye

injury.

(a)

Remove snap ring (11) from end of wheel bearing spindle (12).

(b)

Remove planetary sun gear (9) from wheel bearing spindle (12).

(c)

Remove washer (13) from wheel bearing spindle (12).

(d)

Remove planetary ring gear (10).

(4)

Remove wheel hub and disc assembly (14) and parts (15 through 20).

(a)

Use a sling and hoist or other suitable lifting device to support hub weight during removal.

(b)

Remove hub bearing nut (15) and dowel pin (16) from wheel bearing spindle (12).

9-34