REAR AXLE ASSEMBLY REPLACEMENT/REPAIR - continued

TM 10-3930-673-34

(6)

If necessary, remove parts

(11 through 19) from rear axle

assembly (6).

(a)

Remove breather (11), hose (4), and

elbow (12) from rear axle

assembly (6).

(b)

Remove drain plug (13) from rear

axle assembly (6).

(c)

Remove oil filler plug (14) from rear

axle assembly (6).

(d)

Remove two bearings (15) from rear

axle assembly (6).

(e)

Remove four bushings (16) from

rear axle assembly (6).

TR00430

(f)

Remove two oil seals (17) from rear

axle assembly (6).

(g)

Remove two sleeves (18) and bushings (19) from rear axle assembly (6).

c. Cleaning. See Cleaning Instructions (Para 2-12).

d. Inspection. See Inspection Instructions (Para 2-14).

e. Assembly.

(1)

If removed, install parts (11 through 19) on rear axle assembly (6).

(a)

Install two bushings (19) and sleeves (18) on rear axle assembly (6).

(b)

Install two oil seals (17) on rear axle assembly (6).

WARNING

Adhesives, solvents, and sealing compounds can burn easily, can give off harmful vapors,

and are harmful to skin and clothing. To avoid injury or death, keep away from open fire

and use in a well-ventilated area. If adhesive, solvent, or sealing compound gets on skin

or clothing, wash immediately with soap and water.

(c)

Apply sealing compound on outside diameter of four bushings (16).

(d)

Install four bushings (16) on rear axle assembly (6).

(e)

Install two bearings (15) on rear axle assembly (6).

(f)

Install oil filler plug (14) on rear axle assembly (6).

(g)

Install drain plug (13) on rear axle assembly (6).

(h)

Install elbow (12), hose (4), and breather (11) on rear axle assembly (6).

9-7