8-6. FRONT PLANETARY WHEEL ENDS REPLACEMENT (CONT)
Align the match marks on the spider flange and wheel hub as previously marked during
Align holes on wheel hub (2) with holes on planetary spider (1) flange and push spider
assembly against wheel hub.
Install 16 screws (3) and washers (4) on planetary spider (1) and wheel hub (2). Tighten
screws 60 - 75 lb-ft (81.35 - 101.69 N·m).
· Fill planetary wheel ends with lubricant (TM 10-3930-673-20).
· Install front disc brake assembly (Para 10-3).
· Install wheel assembly (TM 10-3930-673-20).
END OF TASK