Remove front disk brake assemblies (Para 10-3).
Remove nut (3), lockwasher (4),
clamp (5), and axle breather
hose (6) from frame. Discard
Wipe area clean around all hydraulic connections to be opened during removal. Cap oil
lines and plug holes after removing lines. Contamination of the hydraulic system could
result in premature failure.
If more than one hydraulic line is to be removed, identify lines to assure proper
installation. Use suitable container to catch any hydraulic oil that may drain from the
Tag, mark, and disconnect front
steering cylinder hoses (7) from
front axle assembly (8).