TRANSMISSION INPUT SHAFT REPLACEMENT/REPAIR - continued

TM 10-3930-673-34

7-7.TRANSMISSION INPUT SHAFT REPLACEMENT/REPAIR (CONT)

WARNING

Adhesives, solvents, and sealing

compounds can burn easily, can give

off harmful vapors, and are harmful

to skin and clothing. To avoid injury

or death, keep away from open fire

and use in a well-ventilated area. If

adhesive, solvent, or sealing

compound gets on skin or clothing,

wash immediately with soap and

TR00240

water.

(c)

Apply sealing compound, to threads

of three screws (11) and install screws in input shaft (12) and front cover (1).

(2)

Install front cover (1), torque

converter (2), and front housing (3)

as a unit to main case (4).

(a)

Position gasket (10) on main

case (4).

(b)

Attach suitable lifting device to

front cover assembly (1), torque

converter (2), and front housing (3)

as a unit. Lift unit into position on

main case (4).

(c)

Install four screws (9), three

screws (8) and screws (5, 6 and 7) on

front cover (1) and main case (4).

TR00239

NOTE

Follow-on Maintenance: Install transmission assembly (Para 7-4).

END OF TASK

7-56