TRANSMISSION ASSEMBLY REPLACEMENT/REPAIR - continued

TM 10-3930-673-34

7-4. TRANSMISSION ASSEMBLY REPLACEMENT/REPAIR (CONT)

(r)

Remove preformed packing (96) and

outer piston seal (97) from

piston (95). Discard preformed

packing and seal.

(s)

Turn shaft assembly (77) over and

repeat Steps (e), (g), (h), and (m)

through (q).

TR00215

(7)

Disassemble third stage clutch

pack (57) and parts (98 through 118).

(a)

Remove three seal rings (98) from

shaft assembly (99).

(b)

Use two pry bars, 180 apart, to pry

bearing (100) up and remove it from

shaft assembly (99).

TR00216

WARNING

Use care when removing snap and

retaining rings. Snap and retaining

rings are under spring tension and

can act as projectiles when released

and could cause severe eye injury.

(c)

Remove two snap rings (101) from

shaft assembly (99).

(d)

Use a gear puller to remove weld

gear (102) and bearing (103) as an

assembly from shaft assembly (99).

TR00217

(e)

Using an assistant to spread snap

ring (104), use a driver to remove

bearing (103) from weld gear (102).

7-22