7-4. TRANSMISSION ASSEMBLY REPLACEMENT/REPAIR (CONT)
Tag, mark, and disconnect
hose (29) at main control
valve (30). Move all other hoses to
either side of transmission to
Tag, mark, and disconnect two
wires (31) from neutral safety
Remove parts (33 through 38) and
(40 through 43) from transmission
Remove two screws (33), nuts (34),
washers (35), and rubber
mounts (36) from bracket (37).
Transmission weighs approximately
950 lb (431 kg). Attach suitable
lifting device prior to removal or
installation to prevent possible
injury to personnel.
Use a hoist with slings or other suitable lifting device to support transmission (3). Place slings
under input yoke and output yokes. Secure slings together.
Remove eight screws (38), lockwashers (39), and two brackets (37) from transmission (3).