4-5. FUEL SHUTOFF SOLENOID REPLACEMENT
This Task Covers:
Tools and Special Tools
Tool Kit, General Mechanic's: Automotive
(Item 23, Appendix D)
Cover of air cleaner, bracket of throttle cable and lever of fuel injection pump may be removed for
easier access to fuel shutoff solenoid.
Disconnect connector (1 or 2) of
fuel shutoff solenoid (3 or 4)
from connector (5) of engine
Remove locknut (6) and washer
(7), if equipped, from threaded
stud (8) of fuel injection pump
(9). Discard locknut.
· Perform steps 3 and 4 if
vehicle is equipped with
original fuel shutoff solenoid
which includes a separate
· If fuel shutoff solenoid is to be
replaced by a new solenoid,
DISCARD solenoid (3), two
screws (10), one of three
screws (11) and bracket (12)
Remove two screws (10) and
fuel shutoff solenoid (3) from
bracket (12) and threaded stud (8).
Remove three screws (11) and bracket (12) from side of fuel injection pump (9).