4-4. FUEL INJECTION PUMP REPLACEMENT (CONT)
Remove plug (26), sealing washer (27),
and timing pin (25) from fuel injection
pump (7). Discard sealing washer.
If timing tooth is not aligned with timing
pin hole, rotate fuel injection pump (7)
shaft until timing tooth alines.
Reverse position of timing pin (25) so the
slot in pin will fit over timing tooth in fuel
injection pump (7).
Remove fuel shutoff solenoid (Para 4-5) and
bracket, if equipped.
b. Cleaning. See Cleaning Instructions (Para 2-12).
c. Inspection. See Inspection Instructions (Para 2-14).