4-4. FUEL INJECTION PUMP REPLACEMENT (CONT)
Locate top dead center for number 1
· If engine timing pin is not serviceable,
TDC is achieved when exhaust valve
stops moving and intake valve is
beginning to open.
· Disengage timing pin immediately
after locating top dead center.
· Mark flywheel housing and flywheel
housing coupling for aid in
Remove screw (10), preformed packing
(11), number 6 cover (12) and gasket
(13). Discard preformed packing and
Rotate engine counterclockwise while
observing position of exhaust and intake
valves. When exhaust valve is closing,
push engine timing pin (14) into hole in
the camshaft gear.
Mark flywheel housing/flywheel
housing coupling for aid in installation.