If removed, align baffle (8) on push rod cover (3).
Adhesives, solvents, and sealing compounds can burn easily, can give off harmful vapors,
and are harmful to skin and clothing. To avoid injury or death, keep away from open fire
and use in a well-ventilated area. If adhesive, solvent, or sealing compound gets on skin
or clothing, wash immediately with soap and water.
Apply sealant to adhesive side of gasket (7). Install gasket, push rod cover (3), grommet
seals (5), and screws (4) on engine block (6).
Install hose (2) and spring clamp (1) on push rod cover (3).
· Install fuel injection pump (Para 4-4).
· Install fuel filter assembly (TM 10-3930-673-20).
END OF TASK