FRONT HOUSING AND COVER REPLACEMENT - continued

TM 10-3930-673-34

3-21. FRONT HOUSING AND COVER REPLACEMENT (CONT)

(7)

If oil seal (14) is to be reused:

(a)

Install seal pilot from seal kit into

inside diameter of oil seal (14) to

protect lips of oil seal during

installation.

(b)

Install gasket (8) onto gear

housing (9).

(c)

Install oil seal (14) and gear

cover (7) onto gear housing (9) as an

assembly.

(d)

Install 11 screws (6) and eight

screws (5) in gear cover (7) and gear

housing (9). Tighten screws to

216 in-lb (24.40 Nm).

(8)

Install screw belt guide (4) and

screw (3). Tighten screw to 216 lb-in

(24.40 Nm).

TR01780

3-136