3-19. VALVE TAPPETS REPLACEMENT (CONT)
If new tappets were installed, a new
camshaft must also be installed.
Position engine stand so
crankshaft (1) is facing up.
Be careful not to drop the tappets
into bottom of the pistons during
tappet installation as this could
Apply Lubriplate 105 to outside
diameter of tappet (2).
Use a magnet to install tappets (2)
into cylinder block (3).
· Install camshaft (Para 3-20).
· Install oil pan (Para 3-23).
END OF TASK