3-10. CRANKSHAFT FRONT SEAL REPLACEMENT
This Task Covers:
Tools and Special Tools
Crankshaft vibration damper removed
Tool Kit, General Mechanic's: Automotive
(Item 23, Appendix D)
Shop Equipment, Automotive Maintenance and
Repair; Field Maintenance, Basic, Less Power
Compound, Sealing (Item 44, Appendix B)
(Item 18, Appendix D)
Rags, Wiping (Item 35, Appendix B)
Shop Equipment, Machine Shop: Field
Screw, #10 Sheet Metal
Maintenance Basic, Less Power
Seal, Front Oil
(Item 19, Appendix D)
Slide Hammer Dent Puller
(Item 20, Appendix D)
Drill two 1/8 in. (3.175 mm) holes 180°
apart in oil seal (1) carrier.
Remove front oil seal (1) with slide
hammer dent puller.
Insert a #10 sheet metal screw into
end of slide hammer dent puller.
Alternately put slide hammer dent
puller into the two 1/8 in.
(3.175 mm) drilled holes and pull
until oil seal (1) is removed. Discard
front oil seal.