 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 10-3930-673-34
(g)
Apply a light coat of lubricating oil
on threads of two screws (4).
(h)
Install lower bearing half (6),
bearing cap (3), and two screws (4)
on position no. 1 bearing bore in the
cylinder block.
(i)
Alternately tighten two screws (4) to
final torque value in these three
steps:
Step
Torque Value
1
44 lb-ft (59.66 Nm)
2
88 lb-ft (119.31 Nm)
3
129 lb-ft (174.90 Nm)
(j)
Check main bearing halves (5 and 6)
position no. 1 clearance, Steps (2)(a)
and (b).
(k)
Remove main bearing halves (5 and
6) position no. 1, Steps (4)(b), (c),
and (d).
(7)
Check main bearing halves (5 and 6)
bearing position 7 clearance.
(a)
Install main bearing halves (5 and
6) position no. 7, Steps (1)(a)
through (j).
TR01416
(b)
Alternately tighten capscrews (4) to
final torque value in these three
steps:
Step
Torque Value
1
44 lb-ft (59.66 Nm)
2
88 lb-ft (119.31 Nm)
3
129 lb-ft (174.90 Nm)
(c)
Check bearing clearance, Steps (2)(a) through (f).
3-85
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals