 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 10-3930-673-34
3-6. CYLINDER BLOCK REPLACEMENT (CONT)
(7)
Install camshaft bushing (1) in
cylinder block (3).
(a)
Mark location of oil hole (20) in
camshaft bore using felt pen.
(b)
Place camshaft bushing (1) in its
bore, taking care to align oil hole in
bushing with oil hole (20) in
camshaft bore.
(c)
Install camshaft bushing (1) until
bushing is flush with face of
cylinder block (3).
TR01683
NOTE
The specified rod diameter
represents the minimum sized oil
passage required for adequate
camshaft bushing lubrication.
Remove and reinstall camshaft
bushing if oil hole alignment is
unsatisfactory.
(d)
Check oil hole alignments by
inserting a 0.128 in. (3.2 mm)
diameter rod into bushing oil
hole (21) and insuring that rod can
also enter oil hole (20) in camshaft
bore.
TR01684
NOTE
Follow-on Maintenance:
Install engine oil cooler (Para 3-26).
Install crankshaft main bearings (Para 3-9).
Install connecting rods and bearings (Para 3-17).
Install flywheel housing and cover (Para 3-15).
Install crankshaft (Para 3-8).
Install camshaft and timing gears (Para 3-20).
Install valve tappets (Para 3-19).
Install engine in vehicle (Para 3-3).
END OF TASK
3-36
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals