3-5. ENGINE LIFTING BRACKETS REPLACEMENT (CONT)
Remove engine front lifting
bracket (3) from engine (2).
Remove two screws (4) and front lifting
b. Cleaning. See Cleaning Instructions (Para
c. Inspection. See Inspection Instructions
Install front lifting bracket (3) on
Adhesives, solvents, and sealing
compounds can burn easily, can give
off harmful vapors, and are harmful
to skin and clothing. To avoid injury
or death, keep away from open fire
and use in a well-ventilated area. If
adhesive, solvent, or sealing
compound gets on skin or clothing,
wash immediately with soap and
Apply sealing compound to threads of screws (4).
Install front lifting bracket (3) on engine (2) with two screws. Tighten screws to 57 lb-ft
Position engine rear lifting
bracket (1) on engine, and install
thermostat (TM 10-3930-673-20).
END OF TASK