3-3. ENGINE ASSEMBLY REPLACEMENT (CONT)
Install radiator support (103), three
lockwashers (102), and screws (101)
on cylinder head (104).
Install frame cross member (97) on
Using suitable lifting device hoist
and sling, position frame cross
member (97) on frame (99).
Adhesives, solvents, and sealing
compounds can burn easily, can give
off harmful vapors, and are harmful
to skin and clothing. To avoid injury
or death, keep away from open fire
and use in a well-ventilated area. If
adhesive, solvent, or sealing
compound gets on skin or clothing,
wash immediately with soap and
Apply sealing compound to threads
of six screws (98).
Install six lockwashers (100) and screws (98). Tighten screws to 210 lb-ft (284.72 N·m).