Engine assembly weighs 1,075 lb
(487.61 kg). Attach suitable lifting
device prior to installation to
prevent possible injury to personnel.
Install engine (117) in vehicle.
Install two front rubber
mounts (121) and rear rubber
mount (122) on right and left front
engine mounts (108 and 112) and
rear engine mount (116).
Attach lifting chains to front and
rear engine lifting brackets (118 and
Attach lifting chains to forklift truck
forks or other suitable lifting device.
Slowly lift and install engine
through the back of the engine
compartment. Lift engine high
enough to clear rear frame support
Lower engine into position over
rubber mounts and install
screw (115), rebound washer (114),
and locknut (113) on rear engine
Install screw (111), rebound
washer (110), and locknut (109) on
left front engine mount (112).
Install screw (107), rebound
washer (106), and locknut (105) on
right front engine mount (108).
Remove lifting device and lifting
chains from engine lifting
brackets (118 and 119).
Tighten locknuts (105, 109, and 113)
to 307 lb-ft (416.24 N·m).