Remove locknut (105), rebound
washer (106), and screw (107)
from right front engine
mount (108). Discard locknut.
Remove locknut (109), rebound
washer (110), and screw (111)
from left front engine
mount (112). Discard locknut.
Remove locknut (113), rebound
washer (114), and screw (115)
from rear engine mount (116).
Engine assembly weighs 1,075 lb
(487.61 kg). Attach suitable lifting
device prior to removal to prevent
possible injury to personnel.
Remove engine (117) from vehicle.
Attach lifting chains (2,000 lb
[907.18 kg] capacity) to engine
lifting brackets (118 and 119).
Use forklift truck or other
suitable lifting device to remove
engine. Attach lifting chains to
forklift forks or other suitable
Raise engine (117) high enough to
clear rear frame support
Slowly remove engine (117)
through the back of engine
Place engine (117) in suitable
Remove and discard two front
rubber mounts (121) and rear
rubber mount (122) from right
and left front engine mounts (108
and 112) and rear engine