20-3. ARCTIC HEATER FUEL PUMP REPLACEMENT
Plug end of fuel hose to minimize spillage
Disconnect fuel suction hose (6) from bottom
of fuel pump (3).
Spilled fuel is slippery and flammable.
Clean up and properly dispose of spilled
fuel. Failure to follow this warning may
cause injury or death.
Remove locknut (7), washer (8), holder (9),
and fuel pump (3) from stud of heater
mounting bracket (10). Discard locknut.
Remove fuel pump (3) from holder (9).
Position fuel pump (3) into holder (9) with
wire connector of fuel pump facing upward.
Install holder (9) with fuel pump (3) to stud
of heater mounting bracket (10) with washer
(8) and new locknut (7).