 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 10-3930-673-20-2
18-15. ATTACHMENT CYLINDER REPLACEMENT (CONT)
(4)
Remove two spring clips (10) and pin (11)
from boom (12) and attachment cylinder (5).
(5)
Lower attachment cylinder (5) to ground.
10
(6)
Remove two grease fittings (13) from
attachment cylinder (5).
b. Installation.
11
13
5
13
WARNING
12
9
Failure to support rear portion of
TR00507
attachment cylinder when installing pivot
pin may cause severe injury or death to
personnel and damage to cylinder.
(1)
Install two grease fittings (13) on attachment cylinder (5).
(2)
Using suitable lifting device, position attachment cylinder (5) in boom (12) and attachment (9).
(3)
Install pin (11) in boom (12) and attachment cylinder (5).
(a)
Apply anti-seize compound to pin (11).
(b)
Raise or lower attachment cylinder (5) as required to aid pin (11) installation.
(c)
Install pivot pin (11) in boom (12) and attachment cylinder (5) with two spring clips (10).
(4)
Install pivot pin (8) in attachment (9) and
attachment cylinder (5).
(a)
Apply anti-seize compound to pivot pin
6
(8).
(b)
Raise or lower attachment cylinder (5) as
required to aid pivot pin (8) installation.
NOTE
8
5
Ensure pivot pin is aligned with bolt hole
for ease of installation.
7
(c)
Install pivot pin (8) in attachment (9) and
9
attachment cylinder (5) with screw (7)
and locknut (6).
TR00506
18-88
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals