9-6. TRANSMISSION ASSEMBLY SERVICE/TEST (CONT)
Remove cap of filler tube (4) and fill
transmission (1) with four gallons of oil.
Start and run engine (TM 10-3930-673-
10) at idle speed for two full minutes with
transmission travel select lever in neutral
to allow transmission hydraulic system to
With engine still running at idle speed,
check oil level of transmission (1) with
dipstick (5). If oil level is low, add
additional oil until level reaches full mark
· FULL at 104°F (40°C) is the low mark
· FULL at 176°F (80°C) is the high mark
Check for leaks at strainer (2),
transmission oil filter element, and at all
transmission hose connections. Stop
engine (TM 10-3930-673-10)
b. Transmission Hydraulics Test.
Refer to STE/ICE testing (Para 2-14).
Follow-on Maintenance: Install transmission cover (Para 16-5).
END OF TASK