Remove and discard engine oil filter element
Place suitable container under filter
Remove filter element (4) and seal (5)
from filter head (6). Discard seal and
Install engine oil filter element (4).
Clean surface of filter head (6) to remove
any possible contaminants.
Lubricate seal (5) with clean oil.
Do not overtighten filter element.
Overtightening may distort filter element
threads and seal.
Install seal (5) and filter element (4) in
filter head (6) until top of element makes
contact with filter head. Tighten filter
element an additional 3/4 turn.
Install oil drain plug (l) and add oil through
engine oil filler (7).
Install washer (2) and oil drain plug (1) in
engine oil pan (3).
Engine oil capacity is 15 qt (14.2 l) including
Remove cap (8) from engine oil filler (7)
and add oil. Install cap.
Start engine (TM 9-2320-673-10) and check
for oil leaks.
END OF TASK