Visually inspect hydraulic hoses leading to
rear steering cylinders for cracks, kinks, or
(a) If there are no cracks, kinks, or
pinches in hydraulic hoses, go to
Step 3 of this fault.
(b) If there are cracks, kinks, or
pinches in one or more of hydraulic
hoses, shut down engine
(TM 10-3930-673-10) and replace
hose(s) (Para 14-6).
Hydraulic hoses must be mounted (indexed)
in such a way to allow movement of hoses
during steering without rubbing, crimping, or
exceeding minimum bend radius.
HYDRAULIC HOSE CONNECTIONS
Visually inspect hydraulic hose connections
leading to left and right rear steering
cylinders for leaks.
(a) If there are no leaks at hydraulic
hose connections, go to Step 4 of
(b) If there are leaks at one or more of
connections, shut down engine
(TM 10-3930-673-10) and tighten
or replace connection(s)