Visually inspect hydraulic hoses leading to
left and/or right hoist cylinders for cracks,
kinks, or pinches.
(a) If there are no cracks, kinks, or
pinches in hydraulic hoses, go to
Step 3 of this fault.
(b) If there are cracks, kinks, or
pinches in one or more hydraulic
hoses, shut down engine
(TM 10-3930-673-10) and replace
hose(s) (Para 18-25).
HYDRAULIC HOSE CONNECTIONS/
TUBES VISUAL INSPECTION
Visually inspect hydraulic hose connections
leading to hoist cylinders for leaks. Visually
inspect hydraulic tubes on cylinder housings.
(a) If there are no leaks at hydraulic
hose connections and tubes are
not damaged, go to Step 4 of this
(b) If there are leaks at one or more
connections, shut down engine
(TM 10-3930-673-10) and tighten
or replace connection(s)
(Para 18-25). If tubes are
damaged, replace tubes