AIR CONDITIONER BELT
Inspect air conditioner belt for proper tension
and/or signs of wear.
(a) If tension correct and belt free from
signs of wear, go to Step 3 of this
(b) If tension is incorrect, tighten or
loosen the belt as necessary
(c) If belt shows signs of wear (cracks,
deteriorated sections), replace belt
LINES AND FITTINGS
Use a leak detector (which is sensitive to
refrigerant in use) to check air conditioning
lines and fittings for leaks.
(a) If lines and fittings are clean, tight,
and free from leaks, go to Step 4 of
(b) If leaks are detected, evacuate
system, replace faulty lines and/or
fittings, and recharge system.