CONTROL VALVE CABLE ASSEMBLY
AND CONNECTION TO CONTROL VALVE
Inspect heater control valve cable assembly
and its connection to heater control valve
(a) If control valve cable assembly is
correctly connected to control
valve and functioning, go to Step 3
of this fault.
(b) If cable assembly is disconnected
from control valve, connect
assembly to valve (Para 17-8).
(c) If cable assembly is damaged,
replace assembly (Para 17-8).
ENGINE WATER TEMPERATURE
Check engine water temperature gage to
determine if water temperature is within the
normal (180 to 210 degrees F) operating
(a) If engine water temperature is
within normal operating range, go
to Step 4 of this fault.
(b) If engine water temperature below
normal, refer to Fault 12, Engine
water temperature below normal
on Page 2-678 to correct fault.