 |
|||
|
|
|||
|
Page Title:
TRANSMISSION DISCONNECT SLOW OR MALFUNCTIONING - continued |
|
||
| ||||||||||
|
|
 TM 10-3930-673-20-1
TRANSMISSION OIL PRESSURE
STE/ICE PRESSURE TEST
(1) Install STE/ICE test device on port
number 1 of transmission control valve.
(2) Perform STE/ICE Test #50
(TM 9-4910-571-12&P).
(3) Read output pressure on test device.
(a) If pressure is within 120 to 220 PSI
at 2000 RPM, go to Step 3 of this
fault.
(b) If pressure is below specified
range, check for leaks along
transmission lines, or for faulty
control valve. Shut down engine
(TM 10-3930-673-10) and replace
components as necessary
(Para 9-6 and Para 9-10).
TRANSMISSION DISCONNECT
MASTER CYLINDER
VISUAL INSPECTION
Loosen retainer and remove cover from
transmission disconnect master cylinder.
(a) If fluid level is below 1/4 in.
(6.35 mm) of top, service
transmission disconnect
master cylinder fluid level
(LO 10-3930-673-12).
(b) If fluid level is within 1/4 in.
(6.35 mm) of top, install cover with
retainer. Go to Step 4 of this fault.
TR01202
2-703
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals