TRANSMISSION DISCONNECT SLOW OR MALFUNCTIONING - continued

TM 10-3930-673-20-1

WARNING

Improper cleaning methods and use of unauthorized cleaning solvents may injure personnel and damage equipment. Refer to

TM9-247 for correct information.

Eye shields must be worn when cleaning with a wire brush. Flying rust and metal particles may cause injury to personnel.

Particles blown by compressed air are hazardous. Make certain the air stream is directed away from user and other personnel in

the area. To prevent injury, user must wear protective goggles or face shield when using compressed air.

CAUTION

Washing oil seals, electrical cables and flexible hoses with dry cleaning solvents or mineral spirits will cause serious damage or

destroy materials.

TRANSMISSION OIL

VISUAL INSPECTION

Check transmission oil level with dipstick.

Transmission oil should be at or near FULL

mark.

(a) If transmission oil at FULL mark,

go to Step 2 of this fault.

(b) If transmission oil is at or near ADD

mark, add transmission oil as

necessary (Para 9-6).

TR01201

2-701