STE/ICE-R RPM CHECK
Use STE/ICE to check engine RPM at idle
(a) If idle RPM within 850 to 950
range, go to Step 3 of this fault.
(b) If idle RPM is not within specified
range, adjust idle speed by
adjusting accelerator cable as
necessary (Para 5-20).
AIR INTAKE AND EXHAUST
Visually inspect air intake and exhaust for
obstructions and/or restrictions.
(a) If air intake and exhaust are clean,
go to Step 4 of this fault.
(b) If air intake and exhaust are
blocked, shut down engine
(TM 10-3930-673-10) and clean
intake cap and exhaust pipe
(Para 5-5, Para 5-4, and Para 6-3).