 |
|||
|
|
|||
|
Page Title:
EMERGENCY STEERING PUMP DOES NOT OPERATE - continued |
|
||
| ||||||||||
|
|
 TM 10-3930-673-20-1
VOLTAGE TEST
(1) Disconnect negative battery cable from
negative side of battery (Para 8-42).
(2) Set multimeter to volts dc.
(3) Connect multimeter positive lead (+) to
emergency steering solenoid where
ground wire connects.
(4) Connect multimeter negative lead () to
known good ground.
(5) Connect negative battery cable to
negative side of battery (Para 8-42).
(6) Turn emergency steering switch ON
(TM 10-3930-673-10).
(a) If voltage is present, go to Step 13
of this fault.
(b) If voltage is not present, replace
emergency steering solenoid
(Para 8-22).
(7) Turn emergency steering switch OFF
(TM 10-3930-673-10).
(8) Disconnect negative battery cable from
negative side of battery (Para 8-42).
VOLTAGE TEST
(1) Disconnect negative battery cable from
negative side of battery (Para 8-42).
S
EMERGENCY
(2) Set multimeter to volts dc.
STEERING
(3) Connect multimeter positive lead (+) to
GROUND
OLENOID
emergency steering motor where
wire 9 connects.
(4) Connect multimeter negative lead () to
known good ground.
(5) Connect negative battery cable to
negative side of battery (Para 8-42).
(6) Turn emergency steering switch ON
(TM 10-3930-673-10).
(a) If voltage is present, go to Step 14
of this fault.
(b) If voltage is not present, repair
WIRE 9
wire 9 (Para 8-49).
TR01559
(7) Turn emergency steering switch OFF
(TM 10-3930-673-10).
(8) Disconnect negative battery cable from
negative side of battery (Para 8-42).
2-587
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals