Quantcast FORK AUTO-LEVELER DOES NOT OPERATE - continued - TM-10-3930-673-20-10525

 

Click here to make tpub.com your Home Page

Page Title: FORK AUTO-LEVELER DOES NOT OPERATE - continued
Back | Up | Next

Click here for thousands of PDF manuals

Google


Web
www.tpub.com

Home


   
Information Categories
.... Administration
Advancement
Aerographer
Automotive
Aviation
Construction
Diving
Draftsman
Engineering
Electronics
Food and Cooking
Logistics
Math
Medical
Music
Nuclear Fundamentals
Photography
Religion
   
   

 

Share on Google+Share on FacebookShare on LinkedInShare on TwitterShare on DiggShare on Stumble Upon
Back
FORK AUTO-LEVELER DOES NOT OPERATE - continued - TM-10-3930-673-20-10524
Up
TM-10-3930-673-20-1 All Terrain Lifter Army System (ATLAS) 10 000 lb Capacity Manual
Next
FORK AUTO-LEVELER DOES NOT OPERATE - continued - TM-10-3930-673-20-10526
TM 10-3930-673-20-1
VOLTAGE TEST
(1) Disconnect negative battery cable from
negative side of battery (Para 8-42).
(2) Set multimeter to dc.
(3) Connect multimeter positive lead (+) to
LIGHT
wire 59 where wire 59 connects to
SOCKET
INDICATOR
auto-level light socket.
LIGHT
(4) Connect multimeter negative lead () to
known good ground.
WIRE 50
(5) Connect negative battery cable to
negative side of battery (Para 8-42).
(6) Turn engine start switch to ON position,
BUT DO NOT START ENGINE
(TM 10-3930-673-10).
(7) Turn auto-level switch to ON
WIRE 59
(TM 10-3930-673-10).
(a) If voltage is present, go to Step 5
of this fault.
CENTER
(b) If voltage is not present, replace
OUTSIDE
CONDUCTOR
auto-level light socket (Para 8-9).
CONDUCTOR
(8) Turn auto-level switch OFF
(TM 10-3930-673-10).
ENGINE
(9) Turn engine start switch to OFF
START
position (TM 10-3930-673-10).
SWITCH
VOLTAGE TEST
(1) Disconnect negative battery cable from
negative side of battery (Para 8-42).
(2) Set multimeter to dc.
(3) Connect multimeter positive lead (+) to
wire 59 where wire 59 connects to
WIRE 59
WIRE 58
auto-level switch.
WIRE 65
(4) Connect multimeter negative lead () to
known good ground.
WIRE 57
(5) Connect negative battery cable to
WIRE 64
negative side of battery (Para 8-42).
(6) Turn engine start switch to ON position,
BUT DO NOT START ENGINE
(TM 10-3930-673-10).
(7) Turn auto-level switch to ON
(TM 10-3930-673-10).
DASH
AUTO LEVEL
(a) If voltage is present, go to Step 6
PANEL
SELECT SWITCH
of this fault.
(b) If voltage is not present, go to
TR01749
Step 12 of this fault.
(8) Turn auto-level switch OFF
(TM 10-3930-673-10).
(9) Turn engine start switch to OFF
position (TM 10-3930-673-10).
2-473

Privacy Statement - Press Release - Copyright Information. - Contact Us

Integrated Publishing, Inc.