Quantcast AIR CONDITIONER DOES NOT OPERATE - continued - TM-10-3930-673-20-10509

 

Click here to make tpub.com your Home Page

Page Title: AIR CONDITIONER DOES NOT OPERATE - continued
Back | Up | Next

Click here for thousands of PDF manuals

Google


Web
www.tpub.com

Home


   
Information Categories
.... Administration
Advancement
Aerographer
Automotive
Aviation
Construction
Diving
Draftsman
Engineering
Electronics
Food and Cooking
Logistics
Math
Medical
Music
Nuclear Fundamentals
Photography
Religion
   
   

 

Share on Google+Share on FacebookShare on LinkedInShare on TwitterShare on DiggShare on Stumble Upon
Back
AIR CONDITIONER DOES NOT OPERATE - continued - TM-10-3930-673-20-10508
Up
TM-10-3930-673-20-1 All Terrain Lifter Army System (ATLAS) 10 000 lb Capacity Manual
Next
AIR CONDITIONER DOES NOT OPERATE - continued - TM-10-3930-673-20-10510
TM 10-3930-673-20-1
VOLTAGE TEST
(1) Set multimeter to volts dc.
(2) Disconnect male connector from
female connector for dark green wire at
low pressure auto-off switch.
(3) Connect multimeter positive lead (+) to
low pressure cut-off switch where dark
green wire connects.
(4) Connect multimeter negative lead () to
known good ground.
(5) Connect negative battery cable to
negative side of battery (Para 8-42).
(6) Turn engine start switch to START
position, START ENGINE
(TM 10-3930-673-10).
(7) Turn heater/air conditioner switch to
A/C (TM 10-3930-673-10)
(a) If voltage is present, go to Step 8
of this fault.
(b) If voltage is not present, notify
Direct Suport to replace low
pressure cut-off switch.
(8) Turn heater/air conditioner switch OFF
(TM 10-3930-673-10)
(9) Turn engine start switch to OFF
position (TM 10-3930-673-10).
(10) Disconnect negative battery cable from
C
MALE
negative side of battery (Para 8-42).
ONNECTOR
(11) Connect male connector to female
C FEMALE
ONNECTOR DARW GREEN
K
connector.
IRE
VOLTAGE TEST
(1) Set multimeter to volts dc.
(2) Disconnect male connector from
female connector.
(3) Connect multimeter positive lead (+) to
high pressure cut-off switch where dark
green wire connects.
(4) Connect multimeter negative lead () to
known good ground.
(5) Connect negative battery cable to
C IGH PRESSURE
H
negative side of battery (Para 8-42).
(6) Turn engine start switch to START
UT-OFF SWITCH
position, START ENGINE
C OW PRESSURE
L
(TM 10-3930-673-10).
UT-OFF SWITCH
(7) Turn heater/air conditioner switch to
A/C (TM 10-3930-673-10)
(a) If voltage is present, go to Step 9
of this fault.
(b) If voltage is not present, repair dark
green wire (Para 8-48).
(8) Turn heater/air conditioner switch OFF
(TM 10-3930-673-10)
(9) Turn engine start switch to OFF
position (TM 10-3930-673-10).
(10) Disconnect negative battery cable from
negative side of battery (Para 8-42).
(11) Connect male connector to female
connector for dark green wire at high
pressure cut-off switch.
TR01112
2-457

Privacy Statement - Press Release - Copyright Information. - Contact Us

Integrated Publishing, Inc.