Quantcast FRONT AND REAR WINDSHIELD WIPERS DO NOT OPERATE - continued - TM-10-3930-673-20-10483

 

Click here to make tpub.com your Home Page

Page Title: FRONT AND REAR WINDSHIELD WIPERS DO NOT OPERATE - continued
Back | Up | Next

Click here for thousands of PDF manuals

Google


Web
www.tpub.com

Home


   
Information Categories
.... Administration
Advancement
Aerographer
Automotive
Aviation
Construction
Diving
Draftsman
Engineering
Electronics
Food and Cooking
Logistics
Math
Medical
Music
Nuclear Fundamentals
Photography
Religion
   
   

 

Share on Google+Share on FacebookShare on LinkedInShare on TwitterShare on DiggShare on Stumble Upon
Back
FRONT AND REAR WINDSHIELD WIPERS DO NOT OPERATE - continued - TM-10-3930-673-20-10482
Up
TM-10-3930-673-20-1 All Terrain Lifter Army System (ATLAS) 10 000 lb Capacity Manual
Next
FRONT AND REAR WINDSHIELD WIPERS DO NOT OPERATE - continued - TM-10-3930-673-20-10484
TM 10-3930-673-20-1
VOLTAGE TEST
(1) Disconnect negative battery cable from
negative side of battery (Para 8-44).
(2) Set multimeter to volts dc.
(3) Connect multimeter positive lead (+) to
wire 3 where wire 3 connects to circuit
breaker CB3.
(4) Connect multimeter negative lead () to
known good ground.
(5) Connect negative battery cable (1) to
negative side of battery (Para 8-44).
(6) Turn engine start switch to ON position,
BUT DO NOT START ENGINE
(TM 10-3930-673-10).
(a) If 24 vdc is present, go to Step 9 of
this fault.
(b) If 24 vdc is not present, repair
wire 3 (Para 8-48).
(7) Turn engine start switch to OFF
position (TM 10-3930-673-10).
(8) Disconnect negative battery cable from
negative side of battery (Para 8-44).
CIRCUIT BREAKER CB3
WIRE 3
VOLTAGE TEST
(1) Set multimeter to volts dc.
(2) Connect multimeter positive lead (+) to
WIRE 30
wire 30 where wire 30 connects to
circuit breaker CB3.
(3) Connect multimeter negative lead () to
known good ground.
(4) Connect negative battery cable to
negative side of battery (Para 8-44).
(5) Turn engine start switch to ON position,
BUT DO NOT START ENGINE
(TM 10-3930-673-10).
TR01162
(a) If 24 vdc is present, go to Step 10
of this fault.
(b) If 24 vdc is not present, replace
circuit breaker CB3 (Para 8-11).
(6) Turn engine start switch to OFF
position (TM 10-3930-673-10).
(7) Disconnect negative battery cable from
negative side of battery (Para 8-44).
2-431

Privacy Statement - Press Release - Copyright Information. - Contact Us

Integrated Publishing, Inc.