Quantcast FRONT WINDSHIELD WIPERS DO NOT OPERATE - continued - TM-10-3930-673-20-10465

 

Click here to make tpub.com your Home Page

Page Title: FRONT WINDSHIELD WIPERS DO NOT OPERATE - continued
Back | Up | Next

Click here for thousands of PDF manuals

Google


Web
www.tpub.com

Home


   
Information Categories
.... Administration
Advancement
Aerographer
Automotive
Aviation
Construction
Diving
Draftsman
Engineering
Electronics
Food and Cooking
Logistics
Math
Medical
Music
Nuclear Fundamentals
Photography
Religion
   
   

 

Share on Google+Share on FacebookShare on LinkedInShare on TwitterShare on DiggShare on Stumble Upon
Back
FRONT WINDSHIELD WIPERS DO NOT OPERATE - continued - TM-10-3930-673-20-10464
Up
TM-10-3930-673-20-1 All Terrain Lifter Army System (ATLAS) 10 000 lb Capacity Manual
Next
FRONT WINDSHIELD WIPERS DO NOT OPERATE - continued - TM-10-3930-673-20-10466
TM 10-3930-673-20-1
VOLTAGE CHECK
(1) Set multimeter to volts dc.
(2) Connect multimeter positive lead (+) to
wire 31 where wire 31 connects to front
wiper switch.
(3) Connect multimeter negative lead () to
known good ground.
(4) Connect negative battery cable to
negative side of battery (Para 8-44).
(5) Turn engine start switch to ON position,
BUT DO NOT START ENGINE
(TM 10-3930-673-10).
(6) Turn front wiper switch to HI position
(TM 10-3930-673-10).
(a) If 24 vdc is present, go to Step 3 of
this fault.
(b) If 24 vdc is not present, replace
front wiper switch (Para 8-7).
(7) Turn front wiper switch to OFF position
(TM 10-3930-673-10).
(8) Turn engine start switch OFF
(TM 10-3930-673-10).
(9) Disconnect negative battery cable
(Para 8-44).
VOLTAGE CHECK
ENGINE
(1) Set multimeter to volts dc.
START
(2) Connect multimeter positive lead (+) to
SWITCH
WIRE 31
wire 32 where wire 32 connects to front
wiper switch.
(3) Connect multimeter negative lead () to
known good ground.
(4) Connect negative battery cable to
WIRE 32
negative side of battery (Para 8-44).
(5) Turn engine start switch to ON position,
FRONT WIPER
BUT DO NOT START ENGINE
SWITCH
(TM 10-3930-673-10).
(6) Turn front wiper switch to LO position
TR01153
(TM 10-3930-673-10).
(a) If 24 vdc is present, go to Step 4 of
this fault.
(b) If 24 vdc is not present, replace
front wiper switch (Para 8-7).
(7) Turn front wiper switch to OFF position
(TM 10-3930-673-10).
(8) Turn engine start switch OFF
(TM 10-3930-673-10).
(9) Disconnect negative battery cable
(Para 8-44).
2-413

Privacy Statement - Press Release - Copyright Information. - Contact Us

Integrated Publishing, Inc.