(1) Set multimeter to ohms.
(2) Disconnect connector J2 from
(3) Connect multimeter positive lead (+) to
wire 9 at circuit breaker CB6.
(4) Connect multimeter negative lead () to
(a) If continuity is present, service or
replace battery (Para 8-42).
(b) If continuity is not present, repair
wire 9 or connector P2 (Para 8-48).
(5) Install access panel and four screws.
(6) Connect negative battery cable to
negative side of battery
(7) Install battery cover (Para 8-42).
CIRCUIT BREAKER CB6