Quantcast STOPLIGHT(S) DO NOT OPERATE - continued - TM-10-3930-673-20-10205

 

Click here to make tpub.com your Home Page

Page Title: STOPLIGHT(S) DO NOT OPERATE - continued
Back | Up | Next

Click here for thousands of PDF manuals

Google


Web
www.tpub.com

Home


   
Information Categories
.... Administration
Advancement
Aerographer
Automotive
Aviation
Construction
Diving
Draftsman
Engineering
Electronics
Food and Cooking
Logistics
Math
Medical
Music
Nuclear Fundamentals
Photography
Religion
   
   

 

Share on Google+Share on FacebookShare on LinkedInShare on TwitterShare on DiggShare on Stumble Upon
Back
STOPLIGHT(S) DO NOT OPERATE - continued - TM-10-3930-673-20-10204
Up
TM-10-3930-673-20-1 All Terrain Lifter Army System (ATLAS) 10 000 lb Capacity Manual
Next
STOPLIGHT(S) DO NOT OPERATE - continued - TM-10-3930-673-20-10206
TM 10-3930-673-20-1
VOLTAGE TEST
(1) Set multimeter to volts dc.
(2) Connect multimeter positive lead (+) to
brake light switch where wire 42
connects.
(3) Connect multimeter negative lead () to
known good ground.
(4) Connect negative battery cable to
negative side of battery (Para 8-42).
(5) Turn engine start switch to ON position,
BRAKE
L
BUT DO NOT START ENGINE
(TM 10-3930-673-10).
S IGHT
(6) Turn blackout light switch to BRAKE
WITCH
LIGHT position (TM 10-3930-673-10).
(7) Depress brake pedal
(TM 10-3930-673-10).
(a) If 24 vdc is present, go to Step 14
of this fault.
(b) If 24 vdc is not present, replace
W4RE
I
brake light switch (Para 8-17).
(8) Turn blackout lighting switch to OFF
2
position (TM 10-3930-673-10).
(9) Turn engine start switch to OFF
position, (TM 10-3930-673-10).
(10) Disconnect negative battery cable from
negative side of battery (Para 8-42).
VOLTAGE TEST
CONNECTOR P1
J1-6
(1) Set multimeter to volts dc.
(2) Disconnect connector J1 from
connector P1.
(3) Connect multimeter positive lead (+) to
connector J1-6 where wire 43
connects.
(4) Connect multimeter negative lead () to
known good ground.
(5) Connect negative battery cable to
negative side of battery (Para 8-42).
(6) Turn engine start switch to ON position,
CONNECTOR J1
BUT DO NOT START ENGINE
(TM 10-3930-673-10).
(7) Turn blackout light switch to BRAKE
LIGHT position (TM 10-3930-673-10).
(8) Depress brake pedal
(TM 10-3930-673-10).
(a) If 24 vdc is present, go to Step 16
of this fault.
(b) If 24 vdc is not present, go to
Step 15 of this fault.
(9) Turn blackout light switch to OFF
position (TM 10-3930-673-10).
(10) Turn engine start switch to OFF
position, (TM 10-3930-673-10).
(11) Disconnect negative battery cable from
TR01597
negative side of battery (Para 8-42).
2-153

Privacy Statement - Press Release - Copyright Information. - Contact Us

Integrated Publishing, Inc.