(1) Set multimeter to ohms.
(2) Connect multimeter positive lead (+) to
wire 9 at circuit breaker CB6.
(3) Connect multimeter negative lead () to
(a) If continuity is present, service
battery (Para 8-42).
(b) If continuity is not present, repair
wire 9 or connector J2 (Para 8-48).
(4) Install access panel and four screws.
(5) Connect negative battery cable to
negtive side of battery.
(6) Install battery covers (Para 8-42).
(7) Connect connector J2 to connector P2.
CIRCUIT BREAKER CB6