TM 10-3930-671-24 STEP   9   Loosen   and   remove   transfer   pump   end   cap locking  screw,  plate  and  seal  from  the  hydraulic  head (Figure 3.9). FIGURE 3.9. STEP 10 Loosen and remove the transfer pump end cap assembly, using the end cap socket (Figures 3.1 Oa and 3.10b). STEP    11    Disassemble    the    transfer    pump    regulator components (Figure 3.11). Remove the inlet filter screen seal. Remove the end plate adjusting plug assembly with socket  head  wrench.   Shake   the   regulating   spring   and piston  out   of   the   regulating   assembly.   Using   pressure regulating sleeve extractor, remove the regulating piston seal from the regulator. NOTE Some   present   regulators   have   metal   piston   seals and do not have to be removed. Figure 3.11. STEP  12  Remove  the  transfer  pump  blades  and  liner (Figure 3.12). FIGURE 3.12. STEP   13   Remove   the   transfer   pump   end   cap   seal (Figure 3.13). FIGURE 3.13.      FIGURE 3.10a. FIGURE 3.10b. F-225