TM 10-3930-671-24 5-24. CARRIAGE ASSEMBLY REPAIR. a. Removal. (1) Remove carriage assembly from forklift (Appendix F, Upright Maintenance, Section 13.1). (2) To remove the side shifter assembly from lift carriage assembly, proceed as follows: (a) Remove four screws (1), two washers (2), and backrest (3) from side shifter assembly frame (4). WARNING Forks  weigh  106  lbs  (48  kg).    Attach  suitable  lifting  device  prior  to  removal  or  installation  to prevent possible injury to personnel. (b) Lift fork levers (5) and remove two forks (6) from side shifter assembly frame ( 4). (c) Disconnect two hydraulic hoses (7) from two elbows (8). (d) Remove four nuts (9), two lower hooks (10), and lower bearings (11) from four screws (12) and washers (13) securing side shifter assembly frame (4) to lift carriage assembly (14). (e) Remove two fittings (15) from side shifter assembly frame (4). 5-42