TM 10-3930-671-24 (10) To install hood latch assembly (23), proceed as follows: (a) Assemble latch bracket (51) with pin (58), latch (57), washer (56), and pin (55). (b) Install pivot lock shaft (54) in latch bracket (51) and lock (53) with pin (52). (c) Install two spacers (49) in latch bracket (51) with two screws (50) and nuts (48).  Tighten nut 70-85 lb-in (8-10 N•m). (d) Install two seat hinge brackets (21) on forklift (5) with four screws (40), washers (39), and nuts (38).  Tighten nuts 180-220 lb-in (20-25 N•m). (e) Install trim seal (37) on top hood (16). (f) Install two bumper pads (35) and nuts (36) on top hood (16). 3-105