TM 10-3930-671-24 (7) Install two fittings (9) and seals (39) on brake master cylinders (28).  Tighten fittings 150-180 lb-in (17-20 N•m). (8) Install two brake master cylinders (28) on bracket (12) with two screws (38) and nuts (37).  Tighten nuts 7188 lb-in (8-10 N•m). (9) Install hoses (35 and 36) on two brake master cylinders (28) and fitting (6) with four clamps (34). (10) Install screw (33) on bracket (12) with locking nut (32). (11) Install two pads (31) on pedals (26 and 27) with two fasteners (30). (12) Install pedals (26 and 27) on bracket (12) with four bushings (29) and pivot (23). (13) Install pedals (26 and 27) on two brake master cylinders (28) with two pins (25) and retainers (24). (14) Install retainer (22) on pivot (23) and bracket (12) with screw (21) and nut (20).  Tighten nut 117-221 lb-in (20-25 N•m). (15) Install bracket (12) on forklift (13) with six screws (15), two straps (16 and 17), wire (18), two harness sections (19), and six nuts (14).  Tighten nuts 117-221 lb-in (20-25 N•m). 3-82