TM 9-2330-373-14 & P Table 4-2.   Operator Troubleshooting Procedures - CONT. Malfunction Test or Inspection Corrective Action TRANSAXLE 13. TRANSAXLE WILL NOT OPERATE IN FORWARD OR REVERSE. Step 1. Check that parking brake is not engaged (Para 2-5 [a]). If parking brake is engaged, release parking brake (Para 2-5 [a]). If parking brake is not engaged, go to Step 2. Step 2. Check transaxle fluid level (Para 3-11 [a]). If fluid level is below lower arrow mark, add fluid (Para 3-11 [b]). If fluid level is OK, notify unit maintenance. 14. TRANSAXLE SHIFTS SLOWLY. Step 1. Check transaxle fluid level (Para 3-11 [a]). If fluid level is below lower arrow mark, add fluid (Para 3-11 [b]). If fluid level is OK, notify unit maintenance. 15. TRANSAXLE SLIPS. Step 1. Check transaxle fluid level (Para 3-11 [a]). If fluid level is below lower arrow mark, add fluid (Para 3-11 [b]). If fluid level is OK, notify unit maintenance. 16. TRANSAXLE LACKS POWER. Step 1. Check transaxle fluid level (Para 3-11 [a]). If fluid level is below lower arrow mark, add fluid (Para 3-11 [b]). If fluid level is OK, notify unit maintenance. 4-6