TM 10-3930-671 -10 Table 3-1.  Operator Preventive Maintenance Checks and Services. Location Item Item To Not Fully Mission No. Interval Check/ Procedure Capable If: Service DAILY GENERAL NOTE • If the equipment must be kept in continuous operation, do only the procedures that can be done without disturbing operation.  Make complete checks and services when the equipment is shut down. • Ensure that all lubrication requirements are performed on the truck as directed in TM 10-3930-671-24. • Perform WEEKLY, as well as BEFORE, PMCS if: 1. You are the assigned operator, but have not operated the equipment since the last WEEKLY. 2. You are operating the equipment for the first time. • Levers, pins, linkage, etc., not equipped with lubrication fittings, should operate freely and be clear of rust. • When checking oil/fuel levels, ensure truck is on level surface for accurate reading. WARNING EXTERIOR Read and understand all of the safety precautions and warnings before per- forming any checks and services or personal injury can result. 1 Before Perform walk- Check for leaks or obvious damage that Class III leaks or any around would require more detailed inspection. fuel leaks. inspection. Check for leaks or obvious damage to Class III leaks or steering axle. cracks. 3-4