TM 10-3930-671-10 c. Adjusting Forks. (1) Read Commercial Operator’s Manual, Appendix E. WARNING • Always ensure that forks are as far apart  as  the  load  will  allow  to  prevent  the  possibility  of loads tipping off of forks and causing injury to personnel or damage to equipment. • Always place forks centered beneath load to prevent possibility of loads tipping off of forks and causing injury to personnel or damage to equipment. • Always ensure fork latch is seated completely to lock fork in position to prevent fork shifting and causing injury to personnel or damage to equipment. (2) Spread each fork (1) by lifting fork latches (2) and using foot to push fork left or right to desired position.  Push fork latch (2) down to lock fork (1) in position. (3) Shift forks (1) to the left by pulling sideshift control lever (3).  Shift forks (1) to the right by pushing sideshift control lever (3) forward. 2-9