TM 10-3930-669-34 WARNING Use  extreme  care  when  removing  or installing springs and retaining rings. Springs and retaining rings are under tension   and   can   act   as   projectiles when    released    suddenly.        Ensure proper    eye    protection    is    worn    to prevent injury to personnel. (6) Install  shaft  seal  (39),  retaining  ring  (38),   and four studs (37) in flange (36). (7) Install  front  pump  body  (33)  on  four  studs  (37) and flange (36). (8) Install  splined  coupling  (34)  on  front  driveshaft (35). (9) Install spacer plate (23) on front pump body (33) with    four    lock    washers    (32)    and    nuts    (31). Tighten  nuts  to  65  to  75  lb-ft  (88-102  N.m)  in  a crisscross pattern. (10) Install  two  bushings  (27  and  28)  in  rear  pump body (22). (11) Install  rear  driven  gear  (29)  and  rear  driveshaft (30) in two bushings (27 and 28). (12) Install  remaining  two  bushings  (27  and   28)   in rear pump body (22). 15-9