TM 10-3930-669-34 14-2. CAB GLASS REPLACEMENT (CONT) (14) Install bracket (7) on frame assembly (3) with two screws (6). (15) Install frame track (5) on frame assembly (3) with four screws (4). CAUTION Do  not  allow  sealing  compound  to  get  in  channel  of  frame  assembly.    This  will  damage channel and not allow window to function properly. (16) Apply small bead of sealing compound to the meeting edge of all glass and frame edges and frame assembly. WARNING Applying excessive or uneven pressure    to    cab    glass    may    cause glass  to  crack  or  break  resulting  in injury   to   personnel   and   damage   to equipment. NOTE • Moistening   rubber   seal   contact points  will  allow  rubber  to  move easier. • Allow   sealing   edge   of   seal   to move  under  locking  edge  when installing frame. (17) Install frame assembly (3) under sealing edge of seal (1) on cab (2). 14-8