TM 10-3930-669-34 12-3. STEERING CYLINDER REPLACEMENT (CONT). NOTE • Steering   cylinder   must   be   installed from right side of steer axle. • Install    steering    cylinder    end    with three holes in its gland first. • Ensure steering cylinder is positioned    on    locator    pin    before installing screws. (2) Positioning  steering  cylinder  (10)  in  steer axle (13), install dowel (14). (3) Install  steering  cylinder  (10)  in  steer  axle (13) with four screws (12). (4) Install   two   preformed   packings   (9)   and fittings (8) in steering cylinder (10). (5) Install two elbows (11) on fittings (8). (6) Install left and right tie rod arms (4 and 5) on  knuckles  (6  and  7)  with  two  pins  (3), washers (2), and cotter pins (1). NOTE Follow-on Maintenance: Install  steer  axle  assembly  (Para  10- 5). END OF TASK 12-8