TM 10-3930-669-34 10-5. STEER AXLE ASSEMBLY REPLACEMENT (CONT). WARNING Steer   axle   weighs   232   lbs   (105   kg). Attach  suitable  lifting  device  prior  to removal    or    installation    to    prevent possible injury to personnel. NOTE Shims may be present between frame sockets   and   silent    blocks    of    both front   and   rear.      Note   location   and number. (2) Place floor jack under steer axle (3). (3) Remove nut (4) and screw (5) from frame socket (6) and front silent block (7). (4) Remove nut (8), screw (9), and shim (10) from frame socket (6) and rear silent block (11). (5) Using  floor  jack,  lower  steer  axle  (3)  and remove from frame (12). WARNING Steer   axle   weighs   232   lbs   (105   kg). Attach  suitable  lifting  device  prior  to removal    or    installation    to    prevent possible injury to personnel. (6) Attach lifting device to steer axle (3). (7) Place    steer    axle    (3)    on    smooth    work surface   with   fittings   (2   and   13)   in   up position. (8) Remove lifting device from steer axle (3). 10-32